FILTER-CLINO

FILTER-CLINO is produced from zeolite (clinoptilolite), hydrated potassium, calcium alumino-silicate mineral, used over the world widely as filtration and purification.

FILTER-CLINO is used for drinking water purification, domestic and industrial waste water treatment, gas separation and odor control applications.

The function of FILTER-CLINO;

Water treatment;

FILTER-CLINO is used for all these applications, successfully.

Ø Municipal drinking water,

Ø Pool water,

Ø Industrial waste water

FILTER-CLINO can adsorb the substances, caused pollution in the water as it has high ion exchange capacity, molecular sieve property and adsorption ability.

Ø FILTER-CLINO helps to increase brightness of the water,

Ø It adsorbs and filters minus 0,1 micron sized particles,

Ø It filters ammonium, heavy metal ions and bacteria, successfully.

Ø It adsorbs ammonium ions, causes to decrease the chloramines, odors and eye irritations.

Regeneration

FILTER-CLINO can be re-charged and used repeatedly. In general, it can be re-charging with sodium chlorite and salty water process. The NaCl solution is prepared 20 grams per 1 liter water. FILTER-CLINO is washed with fresh water before using at the filtration system. After re-charging process, salty water solution will be content ammonium. Saturated FILTER-CLINO is changed with the new one and saturated one can be used for fertilizer additive and soil conditioner.

Utilization of FILTER-CLINO for Filtration of Municipal Drinking Water

The function of FILTER-CLINO can be summarized as three ways;

Ø Physical filtration; the micron sized particles (in practically, < 0,1 micron as its channel pore size is average 0,041 micron ) can be adsorbed it the mineral spaces,

Ø Chemical filtration; FILTER-CLINO has high ion exchanger and adsorbent, used for removing some heavy metals and ammonium,

Ø Behind these, it adsorbs bacteria, algae and many kinds of pigments.

FILTER-CLINO can be used instead of quarts sands as it is molecular sieve, has large surface area and high ion exchange capacity, successfully.

FILTER-CLINO Utilization for Swimming Pools

Utilization function of FILTER CLINO for swimming pools likes drinking water application;

Ø It adsorbs the micro-sized particles in its active surface area,

Ø Adsorption process is used,

Ø Chemical pollution substances are removed with its high ion exchange process.

FILTER-CLINO has the advantageous as there can be less water utilization, energy, chemical process and also it can be regenerated, easily.

Ammonium can be decreased by FILTER-CLINO, considerably, and chloramines are depressed.

Some experimental studies show that FILTER-CLINO application in swimming pools supplied ferrous (Fe+2) ions from 5 ppm to 0,5 ppm. The water hardness decreased considerably. This trial realized in 1 cubic meter sized filtration colon and flow was 150 tons per hour.

FILTER-CLINO for Aquaculture Application

Fish population was decreased mostly because of pollution for sea with industrial and domestic polluted substances and excessive hunting. The fish farms at the seas and fresh water fish plants established, in the course of the time.

The ammonium occurs in the life area of the fishes, open or closed tanks, flowed water. This substance has the toxic effect. FILTER-CLINO is used for purification of the waters, as it has high ammonium affinity and exchange capacity, compared with biological, more effectual and safely.

FILTER-CLINO Utilization for Industrial Waste Water Treatment

The heavy metal ions in the waste water are under the limitations according to EU environmental regulations.

FILTER-CLINO can adsorb many of the mono-valent and divalent ions, successfully.

FILTER-CLINO is used in industrial applications as adsorbent material and ion exchanger.